/*
 * Copyright 2019 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.hardware.graphics.composer@2.4;

import android.hardware.graphics.common@1.2::PixelFormat;
import android.hardware.graphics.common@1.2::Dataspace;
import android.hardware.graphics.composer@2.1::IComposerClient.Command;
import IComposerCallback;
import @2.1::Config;
import @2.1::Display;
import @2.1::Error;
import @2.1::IComposerClient;
import @2.3::IComposerClient;

interface IComposerClient extends @2.3::IComposerClient {
    /**
     * Display attributes queryable through getDisplayAttribute_2_4.
     */
    enum Attribute : @2.1::IComposerClient.Attribute {
        /**
         * The configuration group ID (as int32_t) this config is associated to.
         * Switching between configurations within the same group may be done seamlessly
         * in some conditions via setActiveConfigWithConstraints.
         */
        CONFIG_GROUP = 7,
    };

    /**
     * Required capabilities which are supported by the display. The
     * particular set of supported capabilities for a given display may be
     * retrieved using getDisplayCapabilities.
     */
    enum DisplayCapability : @2.3::IComposerClient.DisplayCapability {
        /**
         * Indicates that the display supports protected contents.
         * When returned, hardware composer must be able to accept client target
         * with protected buffers.
         */
        PROTECTED_CONTENTS = 4,

        /**
         * Indicates that both the composer HAL implementation and the given display
         * support a low latency mode, such as HDMI 2.1 Auto Low Latency Mode.
         */
        AUTO_LOW_LATENCY_MODE = 5,
    };

    enum Command : @2.3::IComposerClient.Command {
        /**
         * SET_CLIENT_TARGET_PROPERTY has this pseudo prototype
         *
         * This command has the following binary layout in bytes:
         *
         *     0 - 3: clientTargetProperty.pixelFormat
         *     4 - 7: clientTargetProperty.dataspace
         *
         *   setClientTargetProperty(ClientTargetProperty clientTargetProperty);
         */
         SET_CLIENT_TARGET_PROPERTY = 0x105 << @2.1::IComposerClient.Command:OPCODE_SHIFT,

        /**
         * SET_LAYER_GENERIC_METADATA has this pseudo prototype
         *
         *   setLayerGenericMetadata(string key, bool mandatory, vec<uint8_t> value);
         *
         * Sets a piece of generic metadata for the given layer. If this
         * function is called twice with the same key but different values, the
         * newer value must override the older one. Calling this function with a
         * 0-length value must reset that key's metadata as if it had not been
         * set.
         *
         * A given piece of metadata may either be mandatory or a hint
         * (non-mandatory) as indicated by the second parameter. Mandatory
         * metadata may affect the composition result, which is to say that it
         * may cause a visible change in the final image. By contrast, hints may
         * only affect the composition strategy, such as which layers are
         * composited by the client, but must not cause a visible change in the
         * final image. The value of the mandatory flag shall match the value
         * returned from getLayerGenericMetadataKeys for the given key.
         *
         * Only keys which have been returned from getLayerGenericMetadataKeys()
         * shall be accepted. Any other keys must result in an UNSUPPORTED error.
         *
         * The value passed into this function shall be the binary
         * representation of a HIDL type corresponding to the given key. For
         * example, a key of 'com.example.V1_3.Foo' shall be paired with a
         * value of type com.example@1.3::Foo, which would be defined in a
         * vendor HAL extension.
         *
         * This function will be encoded in the command buffer in this order:
         *   1) The key length, stored as a uint32_t
         *   2) The key itself, padded to a uint32_t boundary if necessary
         *   3) The mandatory flag, stored as a uint32_t
         *   4) The value length in bytes, stored as a uint32_t
         *   5) The value itself, padded to a uint32_t boundary if necessary
         *
         * @param key indicates which metadata value should be set on this layer
         * @param mandatory indicates whether this particular key represents
         *        mandatory metadata or a hint (non-mandatory metadata), as
         *        described above
         * @param value is a binary representation of a HIDL struct
         *        corresponding to the key as described above
         */
        SET_LAYER_GENERIC_METADATA = 0x40e << @2.1::IComposerClient.Command:OPCODE_SHIFT,
    };

    /**
     * Supersedes {@link @2.1::IComposerClient.DisplayType}.
     */
    enum DisplayConnectionType : uint32_t {
        /**
         * Display is connected through internal port, e.g. DSI, eDP.
         */
        INTERNAL = 0,
        /**
         * Display is connected through external port, e.g. HDMI, DisplayPort.
         */
        EXTERNAL = 1,
    };

    enum ContentType : uint32_t {
        NONE = 0,

        /**
         * These modes correspond to those found in the HDMI 1.4 specification.
         */
        GRAPHICS = 1,
        PHOTO = 2,
        CINEMA = 3,
        GAME = 4,
    };

    /**
     * Constraints for changing vsync period.
     */
    struct VsyncPeriodChangeConstraints {
        /**
         * Time in CLOCK_MONOTONIC after which the vsync period may change
         * (i.e., the vsync period must not change before this time).
         */
        int64_t desiredTimeNanos;

        /**
         * If true, requires that the vsync period change must happen seamlessly without
         * a noticeable visual artifact.
         */
        bool seamlessRequired;
    };

    struct ClientTargetProperty {
        PixelFormat pixelFormat;
        Dataspace dataspace;
    };

    /**
     * Provides a IComposerCallback object for the device to call.
     *
     * This function must be called only once.
     *
     * @param callback is the IComposerCallback object.
     */
    registerCallback_2_4(IComposerCallback callback);

    /**
     * Provides a list of supported capabilities (as described in the
     * definition of DisplayCapability above). This list must not change after
     * initialization.
     *
     * @return error is NONE upon success. Otherwise,
     *     BAD_DISPLAY when an invalid display handle was passed in.
     * @return capabilities is a list of supported capabilities.
     */
    getDisplayCapabilities_2_4(Display display)
        generates (Error error, vec<DisplayCapability> capabilities);

    /**
     * Returns whether the given physical display is internal or external.
     *
     * @return error is NONE upon success. Otherwise,
     *     BAD_DISPLAY when the given display is invalid or virtual.
     * @return type is the connection type of the display.
     */
    getDisplayConnectionType(Display display) generates (Error error, DisplayConnectionType type);

    /**
     * Returns a display attribute value for a particular display
     * configuration.
     *
     * @param display is the display to query.
     * @param config is the display configuration for which to return
     *        attribute values.
     * @return error is NONE upon success. Otherwise,
     *         BAD_DISPLAY when an invalid display handle was passed in.
     *         BAD_CONFIG when config does not name a valid configuration for
     *                    this display.
     *         BAD_PARAMETER when attribute is unrecognized.
     *         UNSUPPORTED when attribute cannot be queried for the config.
     * @return value is the value of the attribute.
     */
    getDisplayAttribute_2_4(Display display, Config config, Attribute attribute)
        generates (Error error, int32_t value);

    /**
     * Retrieves which vsync period the display is currently using.
     *
     * If no display configuration is currently active, this function must
     * return BAD_CONFIG. If the vsync period is about to change due to a
     * setActiveConfigWithConstraints call, this function must return the current vsync period
     * until the change takes place.
     *
     * @param display is the display for which the vsync period is queried.
     * @return error is NONE upon success. Otherwise,
     *         BAD_DISPLAY when an invalid display handle was passed in.
     *         BAD_CONFIG when no configuration is currently active.
     * @return vsyncPeriodNanos is the current vsync period of the display.
     */
    getDisplayVsyncPeriod(Display display)
        generates (Error error, VsyncPeriodNanos vsyncPeriodNanos);

    /**
     * Sets the active configuration and the refresh rate for this display.
     * If the new config shares the same config group as the current config,
     * only the vsync period shall change.
     * Upon returning, the given display configuration, except vsync period, must be active and
     * remain so until either this function is called again or the display is disconnected.
     * When the display starts to refresh at the new vsync period, onVsync_2_4 callback must be
     * called with the new vsync period.
     *
     * @param display is the display for which the active config is set.
     * @param config is the new display configuration.
     * @param vsyncPeriodChangeConstraints are the constraints required for changing vsync period.
     *
     * @return error is NONE upon success. Otherwise,
     *         BAD_DISPLAY when an invalid display handle was passed in.
     *         BAD_CONFIG when the configuration handle passed in is not valid
     *                    for this display.
     *         SEAMLESS_NOT_ALLOWED when seamlessRequired was true but config provided doesn't
     *                              share the same config group as the current config.
     *         SEAMLESS_NOT_POSSIBLE when seamlessRequired was true but the display cannot achieve
     *                               the vsync period change without a noticeable visual artifact.
     *                               When the conditions change and it may be possible to change
     *                               the vsync period seamlessly, onSeamlessPossible callback
     *                               must be called to indicate that caller should retry.
     * @return timeline is the timeline for the vsync period change.
     */
    setActiveConfigWithConstraints(Display display, Config config,
        VsyncPeriodChangeConstraints vsyncPeriodChangeConstraints)
        generates (Error error, VsyncPeriodChangeTimeline timeline);

    /**
     * Requests the display to enable/disable its low latency mode.
     *
     * If the display is connected via HDMI 2.1, then Auto Low Latency Mode should be triggered. If
     * the display is internally connected and a custom low latency mode is available, that should
     * be triggered.
     *
     * This function should only be called if the display reports support for
     * DisplayCapability::AUTO_LOW_LATENCY_MODE from getDisplayCapabilities_2_4.
     *
     * @return error is NONE upon success. Otherwise,
     *     BAD_DISPLAY when an invalid display handle was passed in.
     *     UNSUPPORTED when AUTO_LOW_LATENCY_MODE is not supported by the composer
     *         implementation or the given display
     */
    setAutoLowLatencyMode(Display display, bool on)
        generates (Error error);

    /**
     * Provides a list of all the content types supported by this display (any of
     * ContentType::{GRAPHICS, PHOTO, CINEMA, GAME}). This list must not change after
     * initialization.
     *
     * Content types are introduced in HDMI 1.4 and supporting them is optional. The
     * ContentType::NONE is always supported and will not be returned by this method..
     *
     * @return error is NONE upon success. Otherwise,
     *     BAD_DISPLAY when an invalid display handle was passed in.
     * @return supportedContentTypes is a list of supported content types.
     */
    getSupportedContentTypes(Display display)
        generates(Error error, vec<ContentType> supportedContentTypes);

    /**
     * Instructs the connected display that the content being shown is of the given type - one of
     * GRAPHICS, PHOTO, CINEMA, GAME.
     *
     * Content types are introduced in HDMI 1.4 and supporting them is optional. If they are
     * supported, this signal should switch the display to a mode that is optimal for the given
     * type of content. See HDMI 1.4 specification for more information.
     *
     * If the display is internally connected (not through HDMI), and such modes are available,
     * this method should trigger them.
     *
     * This function can be called for a content type even if no support for it is
     * reported from getSupportedContentTypes.
     *
     * @return error is NONE upon success. Otherwise,
     *     BAD_DISPLAY when an invalid display handle was passed in.
     *     UNSUPPORTED when the given content type is not supported by the composer
     *         implementation or the given display
     */
    setContentType(Display display, ContentType type)
        generates (Error error);

    struct LayerGenericMetadataKey {
        /**
         * Key names must comply with the requirements specified for
         * getLayerGenericMetadataKeys below
         */
        string name;

        /**
         * The mandatory flag is defined in the description of
         * setLayerGenericMetadata above
         */
        bool mandatory;
    };

    /**
     * Retrieves the set of keys that may be passed into setLayerGenericMetadata
     *
     * Key names must meet the following requirements:
     * - Must be specified in reverse domain name notation
     * - Must not start with 'com.android' or 'android'
     * - Must be unique within the returned vector
     * - Must correspond to a matching HIDL struct type, which defines the
     *   structure of its values. For example, the key 'com.example.V1-3.Foo'
     *   should correspond to a value of type com.example@1.3::Foo, which is
     *   defined in a vendor HAL extension
     */
    getLayerGenericMetadataKeys()
        generates(Error error, vec<LayerGenericMetadataKey> keys);
};