# llvm_mode persistent mode ## 1) Introduction In persistent mode, AFL++ fuzzes a target multiple times in a single forked process, instead of forking a new process for each fuzz execution. This is the most effective way to fuzz, as the speed can easily be x10 or x20 times faster without any disadvantages. *All professional fuzzing uses this mode.* Persistent mode requires that the target can be called in one or more functions, and that it's state can be completely reset so that multiple calls can be performed without resource leaks, and that earlier runs will have no impact on future runs. An indicator for this is the `stability` value in the `afl-fuzz` UI. If this decreases to lower values in persistent mode compared to non-persistent mode, then the fuzz target keeps state. Examples can be found in [utils/persistent_mode](../utils/persistent_mode). ## 2) TL;DR: Example `fuzz_target.c`: ```c #include "what_you_need_for_your_target.h" __AFL_FUZZ_INIT(); main() { // anything else here, e.g. command line arguments, initialization, etc. #ifdef __AFL_HAVE_MANUAL_CONTROL __AFL_INIT(); #endif unsigned char *buf = __AFL_FUZZ_TESTCASE_BUF; // must be after __AFL_INIT // and before __AFL_LOOP! while (__AFL_LOOP(10000)) { int len = __AFL_FUZZ_TESTCASE_LEN; // don't use the macro directly in a // call! if (len < 8) continue; // check for a required/useful minimum input length /* Setup function call, e.g. struct target *tmp = libtarget_init() */ /* Call function to be fuzzed, e.g.: */ target_function(buf, len); /* Reset state. e.g. libtarget_free(tmp) */ } return 0; } ``` And then compile: ``` afl-clang-fast -o fuzz_target fuzz_target.c -lwhat_you_need_for_your_target ``` And that is it! The speed increase is usually x10 to x20. If you want to be able to compile the target without afl-clang-fast/lto, then add this just after the includes: ```c #ifndef __AFL_FUZZ_TESTCASE_LEN ssize_t fuzz_len; #define __AFL_FUZZ_TESTCASE_LEN fuzz_len unsigned char fuzz_buf[1024000]; #define __AFL_FUZZ_TESTCASE_BUF fuzz_buf #define __AFL_FUZZ_INIT() void sync(void); #define __AFL_LOOP(x) ((fuzz_len = read(0, fuzz_buf, sizeof(fuzz_buf))) > 0 ? 1 : 0) #define __AFL_INIT() sync() #endif ``` ## 3) Deferred initialization AFL++ tries to optimize performance by executing the targeted binary just once, stopping it just before `main()`, and then cloning this "main" process to get a steady supply of targets to fuzz. Although this approach eliminates much of the OS-, linker- and libc-level costs of executing the program, it does not always help with binaries that perform other time-consuming initialization steps - say, parsing a large config file before getting to the fuzzed data. In such cases, it's beneficial to initialize the forkserver a bit later, once most of the initialization work is already done, but before the binary attempts to read the fuzzed input and parse it; in some cases, this can offer a 10x+ performance gain. You can implement delayed initialization in LLVM mode in a fairly simple way. First, find a suitable location in the code where the delayed cloning can take place. This needs to be done with *extreme* care to avoid breaking the binary. In particular, the program will probably malfunction if you select a location after: - The creation of any vital threads or child processes - since the forkserver can't clone them easily. - The initialization of timers via `setitimer()` or equivalent calls. - The creation of temporary files, network sockets, offset-sensitive file descriptors, and similar shared-state resources - but only provided that their state meaningfully influences the behavior of the program later on. - Any access to the fuzzed input, including reading the metadata about its size. With the location selected, add this code in the appropriate spot: ```c #ifdef __AFL_HAVE_MANUAL_CONTROL __AFL_INIT(); #endif ``` You don't need the #ifdef guards, but including them ensures that the program will keep working normally when compiled with a tool other than afl-clang-fast/ afl-clang-lto/afl-gcc-fast. Finally, recompile the program with afl-clang-fast/afl-clang-lto/afl-gcc-fast (afl-gcc or afl-clang will *not* generate a deferred-initialization binary) - and you should be all set! ## 4) Persistent mode Some libraries provide APIs that are stateless, or whose state can be reset in between processing different input files. When such a reset is performed, a single long-lived process can be reused to try out multiple test cases, eliminating the need for repeated `fork()` calls and the associated OS overhead. The basic structure of the program that does this would be: ```c while (__AFL_LOOP(1000)) { /* Read input data. */ /* Call library code to be fuzzed. */ /* Reset state. */ } /* Exit normally. */ ``` The numerical value specified within the loop controls the maximum number of iterations before AFL++ will restart the process from scratch. This minimizes the impact of memory leaks and similar glitches; 1000 is a good starting point, and going much higher increases the likelihood of hiccups without giving you any real performance benefits. A more detailed template is shown in [utils/persistent_mode](../utils/persistent_mode). Similarly to the deferred initialization, the feature works only with afl-clang-fast; `#ifdef` guards can be used to suppress it when using other compilers. Note that as with the deferred initialization, the feature is easy to misuse; if you do not fully reset the critical state, you may end up with false positives or waste a whole lot of CPU power doing nothing useful at all. Be particularly wary of memory leaks and of the state of file descriptors. When running in this mode, the execution paths will inherently vary a bit depending on whether the input loop is being entered for the first time or executed again. ## 5) Shared memory fuzzing You can speed up the fuzzing process even more by receiving the fuzzing data via shared memory instead of stdin or files. This is a further speed multiplier of about 2x. Setting this up is very easy: After the includes set the following macro: ```c __AFL_FUZZ_INIT(); ``` Directly at the start of main - or if you are using the deferred forkserver with `__AFL_INIT()`, then *after* `__AFL_INIT()`: ```c unsigned char *buf = __AFL_FUZZ_TESTCASE_BUF; ``` Then as first line after the `__AFL_LOOP` while loop: ```c int len = __AFL_FUZZ_TESTCASE_LEN; ``` And that is all!